Basic Playback Controls; Resume And Last Memory - Pioneer DV-566K-s Operating Instructions Manual

04 Getting started

Basic playback controls

The table below shows the basic controls on
the remote for playing discs. The following
chapter covers more playback features in
more detail.
Button What it does
Starts playback.
DVD and Video CD: If the display
shows RESUME or LAST MEM
playback starts from the resume or
last memory point (see also
Resume and Last Memory below.)
Pauses a disc that's playing, or
restarts a paused disc.
Stops playback.
DVD and Video CD: Display shows
RESUME. Press
cancel the resume function. (See
also Resume and Last Memory
below.)
Press to start fast reverse scan-
ning. Press
normal playback.
Press to start fast forward scan-
ning. Press
normal playback.
Skips to the start of the current
track or chapter, then to previous
tracks/chapters.
Skips to the next track or chapter.
Numbers
Use to enter a title/track number.
Press
few seconds).
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
Video CD/Super VCD/MP3 ).
• If the disc is playing, playback
jumps to the start of the selected
chapter or track.
28
En
(stop) again to
(play) to resume
(play) to resume
ENTER
to select (or wait a
Front panel controls
The (play), (stop), and
on the front panel work in exactly the same
way as their remote control equivalents.
The combined scan/skip buttons on the front
panel ( and
differently from the remote buttons. Press
and hold for fast scan; press for track/chapter
skip.
See Front panel on page 17 for the location
and description of all the front panel controls
for your model.
• You may find with some DVD discs that
some playback controls don't work in
certain parts of the disc. This is not a
malfunction.
• Track skip and number buttons for track
selection do not work with unfinalized CD-
R/RW audio discs.

Resume and Last Memory

When you stop playback of a DVD or Video CD
disc, RESUME is shown in the display indi-
cating that you can resume playback again
from that point.
If the disc tray is not opened, the next time you
start playback the display shows RESUME
and playback resumes from the resume point.
For DVD discs only: If you take the disc out of
the player, the play position is stored in
memory. When you load the disc next time,
the display shows LAST MEM and you can
resume playback (this works for up to five
discs).
If you want to clear the resume/last memory
point, press (stop) while RESUME or LAST
MEM is displayed.
(pause) buttons
) work slightly