Audio Settings Menu; Audio Drc; Virtual Surround - Pioneer DV-566K-s Operating Instructions Manual

Audio Settings menu

Chapter 7
Audio Settings menu

Audio DRC

• Default setting: Off
When watching Dolby Digital DVDs at low
volume, it's easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to On can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends
on the material you're listening to. If the mate-
rial doesn't have wide variations in volume,
you may not notice much change.
1 Press HOME MENU and select 'Audio
Settings' from the on-screen display.
HOME MENU
DVD
Audio Settings
Play Mode
Initial Settings
2 Highlight Audio DRC, then use the
(cursor left/right) buttons to change
to 'On' or 'Off', as required.
Audio Settings
Audio DRC

Virtual Surround

3 Press ENTER to make the setting and
exit the Audio Settings screen.
Video Adjust
Disc Navigator
Setup Navigator
1/ 2 page
Off
Off
• Audio DRC is only effective with Dolby
Digital audio sources.
• Audio DRC is only effective through the
digital output when Digital Out (see
page 51) is set to On, and Dolby Digital
Out (see page 52) is set to Dolby Digital
> PCM.
• The effect of Audio DRC depends on your
speakers and AV receiver settings.
Virtual Surround
• Default setting: Off
Switch on Virtual Surround to enjoy surround
sound effects from just two speakers.
When you play a Dolby Digital or Pro Logic
encoded source, TruSurround technology
from SRS produces a deep, realistic 3D
soundspace from a pair of stereo speakers.
SRS TruSurround is a process certified by
Dolby Laboratories for Virtual Dolby Digital
sound.
07
47
En