Playing Discs; Basic Playback Controls - Pioneer DV-45A Elite Operating Instructions Manual

04 Getting Started

Playing discs

The basic playback controls for playing DVD,
CD, SACD, Video CD and MP3 discs are
covered here. Further functions are detailed
in the next chapter.
Throughout this manual, the term 'DVD'
means DVD-Video, DVD-Audio and
DVD-R/RW. If a function is specific to a
particular kind of DVD disc, it is
specified.
28
En
OPEN /
CLOSE
DISPLAY AUDIO SUBTITLE ANGLE
SETUP TOP MENU
MENU
– MULTI SPEED +
ENTER
VIDEO
ADJUST DIMMER JOG MODE
V.ADJ FL JOG
7 3 8
E E/
/
4 ¢ 1 ¡
PLAY MODE SURROUND
CLEAR
1 2 3 C
ENTER
4 5 6 E
7 8 9 0
TV CONTROL
+ +
FUNC
VOLUME CHANNEL
TV
– –
1 If the player isn't already on, press
STANDBY/ON to switch it on.
If you're playing a DVD or Video CD, also turn
on your TV and make sure that it is set to the
correct video input.
Press 0 OPEN/CLOSE to open the disc
2
tray.
3 Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc.
Never load more than one disc at a time.
Press 3 (play) to start playback.
4
If you're playing a DVD or Video CD, a menu
may appear. See pages 29-30 for how to
navigate these.
If you're playing an MP3 disc, it may take a
few seconds before playback starts, depend-
ing on the complexity of the file structure on
the disc.

Basic playback controls

The table below shows the basic controls on
the remote for playing discs. The folllowing
chapter covers more playback features in
more detail.