Connecting Up; Rear Panel - Pioneer DV-45A Elite Operating Instructions Manual

02

Connecting Up

Rear panel

1
IN OUT
CONTROL
When connecting this player up to your
TV, AV receiver or other components,
make sure that all components are
switched off and unplugged.
1 CONTROL IN / OUT
For passing remote control signals to other
Pioneer components (page 17).
2 DIGITAL AUDIO OUT – OPTICAL /
COAXIAL
Digital audio outputs for connection to a
PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver (page 16).
3 AUDIO OUT (2ch)
Two channel analog audio outputs for
connection to your TV, AV receiver or stereo
system (pages 13, 15, 16).
4 AUDIO OUT (5.1ch)
Multichannel analog audio outputs for
connection to an AV receiver with
multichannel inputs (page 15).
5 S (S-Video output)
S-Video output(s) that you can use instead of
the video output described in 6 below (page
14).
12
En
3
2 4
L CENTER
OPTICAL COAXIAL
L
AUDIO OUT
(5.1ch)
R
SUB
R
WOOFER
DIGITAL AUDIO AUDIO FRONT SURROUND
OUT OUT
(2ch)
5 6 7
Y
P
B
S-VIDEO VIDEO COMPONENT VIDEO OUT
OUT OUT
6 VIDEO OUT
Standard video output(s) that you can
connect to your TV or AV receiver using the
supplied audio/video cable (pages 13, 15, 16).
7 COMPONENT VIDEO OUT
High quality video output for connection to a
TV, monitor or AV receiver that has compo-
nent video inputs.
Connect using a commercially available
three-way component video cable. Be careful
to match the colors of the jacks and cables
for correct connection (page 14).
8 AC IN
Connect the supplied power cord here, then
plug into a power outlet.
• You may find it useful to have the
manuals supplied with your other
components handy when connecting
this player.
• If you come across any unfamiliar terms
in this section of the manual, take a look
at the Glossary starting on page 73.
8
P
R