The Video Settings Menu; Video Adjust; Creating Your Own Interlace Output Presets - Pioneer DV-45A Elite Operating Instructions Manual

The Video Settings Menu

Video Adjust

• Default setting: Standard
From the Video Adjust screen you can select
the standard video presentation or define
presets of your own.
1 Press SETUP and select 'Video Adjust'
from the on-screen display.
You can also access these settings by
pressing V.ADJ (VIDEO ADJUST).
Audio Settings
Play Mode
Initial Settings
2 Use the joystick (left/right) to select a
preset.
Video Adjust
Standard
• Standard – Normal
• I. Memory1–2 / P. Memory1–2 – Use
for making your own interlaced /
progressive presets (see below)
3 Press ENTER to make the setting and
exit the Video Adjust screen.
• Depending on the disc and the TV/
monitor, you may not see the effect
clearly.
Creating your own interlace
output presets
These presets are available when the video
output is set to interlace. (Use the front panel
PROGRESSIVE button to switch between
interlace and progressive video output. See
also page 18).
Video Adjust
Disc Navigator
Setup Navigator
1 Select one of the Memory presets (see
above).
2 Move the joystick down to select
'Detailed Settings' then press ENTER.
Video Adjust
I.Memory1
Detailed Settings
3 Adjust the picture quality settings.
Interlace Memory 1 (I. Memory 1)
Recall Settings
Fine Focus
Contrast
min
Sharpness
soft
Chroma Level min
Hue green
• Use the joystick (up/down) to select a
setting.
• Use the joystick (left/right) to adjust the
current setting.
• Press DISPLAY to switch between full
and single view.
• You can change the preset number from
the Recall Settings menu item.
You can adjust any or all of the following
picture quality settings:
• Fine Focus – Switch On to reveal
greater detail (high resolution) in the
picture.
• Contrast – Adjusts the contrast
between light and dark elements in the
picture.
• Sharpness – Adjusts the sharpness of
the mid-frequency (less detailed)
elements in the picture. (This setting is
only effective when Fine Focus is On.)
• Chroma Level – Adjusts how saturated
colours appear.
• Hue – Adjusts the overall colour
balance between red and green. (This is
only effective when the player is
connected using the VIDEO OUT or
S-VIDEO OUT jacks.)
I.Memory1
On
max
fine
max
red
07
51
En