Virtual Surround - Pioneer DV-45A Elite Operating Instructions Manual

06 The Audio Settings Menu

Virtual Surround

• Default setting: Off
Switch on Virtual surround to enjoy surround
sound effects from just two speakers.
When you play a Dolby Digital soundtrack,
Virtual Dolby Digital, which uses
TruSurround technology from SRS, produces
a deep, realistic 3D soundspace from a pair
of stereo speakers.
1 Press SETUP and select 'Audio Set-
tings' from the on-screen display.
Audio Settings
Play Mode
Initial Settings
48
En
Video Adjust
Disc Navigator
Setup Navigator
2 Highlight TruSurround, then use the
Joystick (left/right) to change to '2V/
TruSurround' or 'Off', as required.
Audio Settings
Audio DRC
Virtual Surround
Channel Level
3 Press ENTER to make the setting and
exit the Audio Settings screen.
• You can also use the SURROUND
button on the remote control to switch
Virtual Surround on (2V/
TruSurround)/Off.
• Virtual Surround does not work with CD,
MP3, DVD-Audio or SACD discs, or
96kHz Linear PCM soundtracks.
• The Virtual Surround effect is output
only through the analog AUDIO OUT
(2ch) jacks.
• Make sure that Audio Output Mode is
set to 2 Channel (page 64).
• How good the surround effect is varies
with the disc.
1/ 2
Off
Off
Fix