Playing Discs - Pioneer DV-565A Operating Instructions Manual

Getting started

Playing discs

The basic playback controls for playing DVD,
CD, SACD, Video CD/Super VCD and MP3
discs are covered here. Further functions are
detailed in the next chapter.
• Throughout this manual, the term 'DVD'
means DVD-Video, DVD-Audio and DVD-
R/RW. If a function is specific to a
particular kind of DVD disc, it is specified.
STANDBY/ON
1 2
5
4
7 8
/
1 If the player isn't already on, press
 STANDBY/ON to switch it on.
If you're playing a DVD or Video CD/Super
VCD, also turn on your TV and make sure that
it is set to the correct video input.
Press  OPEN/CLOSE to open the disc
2
tray.
OPEN/CLOSE
3
6
ENTER
0
9
ENTER
/
3 Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc (if
you're loading a double-sided DVD disc, load
it with the side you want to play face down).
Press  (play) to start playback.
4
If you're playing a DVD or Video CD/Super
VCD, a menu may appear. See DVD disc
menus on page 32 and Video CD/Super VCD
PBC menus on page 33 for more on how to
navigate these.
If you're playing an MP3 disc, it may take a few
seconds before playback starts, depending on
the complexity of the file structure on the disc.
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Viewing
JPEG discs on page 47 for more on playing
these discs.
• See also PhotoViewer on page 65 if the
disc contains both MP3 audio files and
JPEG picture files (by default, you will not
be able to play the MP3 files).
04
29
En