Chapter 3 Further Function Setting; Enter Function Setting; Function Setting - Excell QWS User Manual

EXCELL PRECISION CO., LTD.

Chapter 3 Further Function Setting

3-1 Enter Function Setting

Power on the scale and before the scale counts down to zero, press
then press
If you press the wrong key, please press
before enteri ng weighing mode.

3-2 Function Setting

 Switch the switch SWA1 back to the LOCK position for approval models, while switch
the switch SWA1 to the ADJ position for non-approval models.
Press key to select function. After selection, press
02027011
keys in order and within 10 seconds to enter Function setting.
Hi/Lo/OK setting
Function Reserved
RS-232 setting
Function Reserved
Other function setting
Unit setting
External Calibration
Restore default setting
16
key again and press three keys in order
key to enter the setting.
Press
to weighing mode.

Only for non-approval models are

marked by

key first. And
key to exit and back

ZSME300000342