Keypad Function - Excell QWS User Manual

EXCELL PRECISION CO., LTD.
 The scale will turn off automatically after a few hours when the low battery warning
symbol shows up. The scale must be fully charged, before operating again.
 When the battery status indication is full, the power is about 6.1V; each block is about
0.2V; when the battery warning symbol shows up, the power is about 5.4V.

1-6 Keypad Function

：Press the key to switch the indicator on or off.
： Zero key. If the weighing value is within the range of zero balance, it can be
re-zeroed.  Confirm key in function operating  Press this key for 3 seconds
to enter backlight setting in weighing mode.
： Shift between gross weight and net weight.  Press this key for 3 seconds to
shift units in weighing mode.  Press this key for 3 seconds to exit in simple
counting mode  Press this key to exit or return in function operating.
： Print key. It needs to connect with printer. According to the setting, press this
key to transmit simple or completed mode format.  Press this key to clear the
entering numbers.
： Accumulation key. According to the setting, press this key to transmit simple or
completed mode format.  Press this key to move the cursor leftward when
entering numbers.  Press this key for 3 seconds to display in high resolution
mode.
：  Check accumulation counts and total weight.  Press this key for 3 seconds to
enter simple counting mode in weighing mode.  Press this key to move the
cursor rightward when entering numbers.
： Tare key. It can be tare except when the weight is negative and the maximum
capacity.  It is selection key in function operating.  Press this key to increase
number when entering numbers.
Pre-tare function:
When there is nothing on the platter and weight is zero, press
pre-tare weight. After enter pre-tare weight, press
key to exit without saving. Pre-tare mode, keypad function as following
⇒ upward key
⇒ clear
02027011
⇒ move cursor leftward
⇒ move cursor rightward
10
key and enter
key to comfirm or press
⇒ save setting
⇒ exit without saving
ZSME300000342