Self-Test Mode - Excell QWS User Manual

EXCELL PRECISION CO., LTD.
Hold Mode (Animal) Setting

2-5 Self-Test Mode

When power is off, hold
enter "Self-Test Mode"
Internal Value Mode
 Pres
key and display shows internal value
 Please check the internal value is within range
 Check whether the backlight is on
 Press
key to back to last screen, the display shows
 Press
key to enter, display shows
 Keypad's internal cod:
 Press
key to back to last screen, the display shows
Firmware Version Display Mode
 Press
key to enter, display shows the firmware version
 Press
key again, the display shows maintenance number
 Press
key to back to the last screen, display shows
Back to the Last Screen
Press key, exit self-test mode, the scale will reboot automatically.
02027011
Error range setting (1%~ 100%)
Press key to adjust; Press
Press or
Default setting = 10%
%
Counts averaging setting
Press key to select 1, 2, 4, 8, 16, 32, 64
Press key to confirm. Default setting = 8
key and press
Keypad Test Mode
= 04,
key to confirm
key to move cursor
key to wait till display shows 01 AdC to
(must hook up full-bridge Load Cell to test)
=05, =07,
15
=06, = 03
for 2 seconds
ZSME300000342