Error Messages; Available Units; Firmware Version - Excell QWS User Manual

EXCELL PRECISION CO., LTD.
Compound key
：Only when it is set"ON"in Hold function, press these 2 keys together to call
+
up Hold function.
：Press these 2 keys together to call up Hi/Lo/Ok setting.
+
：Press these 2 keys together to clear the accumulation data when there is
+
no weight in accumulation mode. M+ indication ""disappears.
High Resolution：Press
returns to original resolution after release

1-7 Error Messages

The EEPROM is not working correctly. (EEPROM is missing or circuit neaby
EEPROM is damaged.)
 Zero is higher than the zero range when switching the indicator on.
 Zero is lower than the zero range when switching the indicator on.
 ADIC value is over the maximum range.
 The weight of the object is over 9 divisions of the maximum capacity.
 The weight of the object is under -1/6 maximum capacity.

1-8 Available Units

kg 1 g = 0.001 kg
g 1 g = 1 g
lb 1 g = 0.002204623 lb
lb,oz 1 g = 0.03527396 oz
Taiwan Tael 1 g = 0.02666667 Tael
H.K. Tael 1 g = 0.02645546 Tael
viss 1 kg = 0.612245 viss

1-9 Firmware Version

When power is off, hold
then press key twice to enter 03 VEr. Press
02027 and then press
key to back to last screen and displays 03 VEr.
02027011
key for 3 seconds to shift to high resolution display. And it
key and press
key to display maintenance number 011 for 2 secs. Press
11
key for 3 seconds.
key to wait till display shows 01 AdC and
key and displays firmware version
ZSME300000342