Connecting A Headset To A Mobile Unit; Testing The Setup - Sennheiser DW 800 Instructions For Use Manual

³
»

Connecting a headset to a mobile unit

To connect a headset to a mobile unit:
Plug the headset plug into the headset socket
that the release button
visible.
To disconnect the headset from a mobile unit:
Press the release button
pressed while pulling the plug out of the socket.
Note:
The headset can stay connected all the time, even
when the mobile unit is placed into the
charging slot. However, the headset must be
removed from the mobile unit when the mobile unit
is placed into the

Testing the setup

To test whether the DW 800 system is properly
connected to the telephone and the handset:
Make sure that the AUX button
position.
Make sure that the headset button
position.
Remove the telephone's handset from the
telephone.
If a dial tone is heard in the handset, the system
is connected properly.
If no dial tone is heared, please refer to
"Connecting
telephone" on page 10.
of the plug remains
of the plug and keep it
left-hand charging slot.
³
the docking station
Basic settings
so
right-hand
is in the "up"
»
is in the "up"
to the
11