Setting Vector Constants; Setting A Quantization Level At Manual Acquisition; Setting A Quantization Level At Automatic Acquisition - JRC JMR-7230-S3 Instruction Manual

19.2.6.2 Setting vector constants

Adjust the vector tracking of the target tracking function.
Note
Do not change this setting unnecessarily. Normally, set 4 for [Vector Constant].

19.2.6.3 Setting a quantization level at manual acquisition

The optimum values are set for the VD Level and Constant. Do not change it
carelessly. Otherwise, the performances of the target tracking function may be
affected and an accident may result.
1
Select a threshold value of a quantization mode at manual acquisition from the [VD
Level Mode (Manual) ] (quantization mode at manual acquisition) combo box.
- Auto Threshold1
- Auto Threshold2
- Manual Threshold

19.2.6.4 Setting a quantization level at automatic acquisition.

The optimum values are set for the VD Level and Constant. Do not change it
carelessly. Otherwise, the performances of the target tracking function may be
affected and an accident may result.
1
Click on the [VD Level (Auto) ] (quantization level at automatic acquisition) input box.
A numeric value input keyboard is displayed.
2
Enter a setting value in the input box. (0 to 255)
For the method of using the numeric input keyboard, refer to "3.15.2 Name and function of each
section of the keyboard".
Section 19 Adjusting and Setting up Equipment (for Services)
19-15
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B