Gather Your Tools - York Fitness X510 Owner's Manual

Assembling your Cross Trainer
PRECAUTIONS:
WARNING: This elliptical has been designed and constructed to provide maximum safety.
Nevertheless, certain precautions should be taken when using exercise equipment.
Read the whole manual before assembling and using the equipment.
The following safety precautions should also be observed:
1. Before using the exercise equipment, please read all instructions in this manual.
2. Use the equipment indoors on a level surface and keep it away from moisture and dust.
Place a mat under the stabilizers to protect the carpet or floor.
3. Inspect and tighten all parts regularly. Replace defective and worn parts immediately.
4. Keep children away from this equipment at all times. DO NOT leave them unsupervised
in the room where this equipment is kept.
5. Wear appropriate exercise clothing when using the equipment. Do not wear loose
clothing that could become caught in the equipment.
6. If you feel pain or dizziness while exercising, stop immediately and cool down.
7. The pulse sensor is not a medical device. Various factors including the user's movement,
may affect the accuracy of the heart rate readings. The Pulse sensor is intended only as
an exercise aid in determining heart rate trends in general.
PRE-ASSEMBLY NOTES:
OPEN THE BOXES
Make sure to inventory all the parts that are included in the boxes. Check the Hardware Chart
for a full count of the number of parts included for proper assembly.

GATHER YOUR TOOLS

Before starting the assembly of your unit, gather the necessary tools. Having all of the
equipment at hand will save time and make the assembly quick and hassle-free.
CLEAR YOUR WORK AREA
Make sure that you have cleared away a large enough space to properly assemble the unit.
Make sure the space is free from anything that may cause injury during assembly. After the
unit is fully assembled, make sure there is a comfortable amount of free area around the unit
for unobstructed operation.
4
www.yorkfitness.com.au