Toshiba RAV-SP1104AT8-E Service Manual page 119

No. Part name
Discharge
2
port cabinet
AMP Air Conditioning
Procedure
1. Detachment
1) Carry out the operation in 1. of
2) Remove the screws fixing the inverter assembly,
the discharge port cabinet and the partition board.
(ST1T Ø4 × 8, 4 pcs.)
3) Remove the screws for the discharge port cabinet
and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
4) Remove screw for the discharge port cabinet and
heat exchanger. (ST1T Ø4 × 8, 1 pc.)
5) Remove screw for the discharge port cabinet and
the motor base. (ST1T Ø4 × 8, 2 pcs.)
6) Remove screws for the discharge port cabinet
and the fin guard.
(Hexagonal screw Ø4 × 10, 2 pcs.)
2. Attachment
1) Attach the discharge port cabinet and end board
of heat exchanger and fix with a screw.
(ST1T Ø4 × 8, 1 pc.)
2) Mount other removed screws into original
positions.
Heat exchanger
Q
above.
– 119 –
www.ampair.co.uk | sales@ampair.co.uk
Remarks
Motor base
Discharge Discharge Discharge
port cabinet port cabinet port cabinet
Fin guard Bottom plate