Mitsubishi Electric Q03UDVCPU User Manual page 37

Qnucpu series (communication via built-in ethernet port)
Hide thumbs Also See for Q03UDVCPU:
Table of Contents

Advertisement

(2) Station No. <-> IP information setting
Communication in Ethernet is performed based on the IP address and UDP port number while communication in
other networks is performed based on the network number and station number.
Communication is relayed between another network and Ethernet, the network number and station number are
converted into an IP address. To enable this conversion, the Station No. <-> IP Information, which is the
information of the association between the network and station numbers and IP address, needs to be set. Set this
information for all CPU modules that go through Ethernet.
Project window
[MELSOFT Connection Extended Setting]
Item
Station No. <-> IP Information
Setting System
Net Mask Pattern
Input Format
Network No.
Station No.
IP Address
[Parameter]
[PLC Parameter]
Description
Select the station No. <-> IP information setting system (conversion
method).
Set the mask value used in the logical product with the own station's IP
address.
This setting is required when "IP Address Calculation System" or
"Combination Use System" is selected in the "Station No. <-> IP Information
Setting System".
Select the input format of "Net Mask Pattern" and "IP Address".
Set the network numbers of the request destination/source stations.
This setting is required when "Table Exchange System" or "Combination
Use System" is selected in "Station No. <-> IP Information Setting System".
Set the station number of the request destination/source stations.
This setting is required when "Table Exchange System" or "Combination
Use System" is selected in "Station No. <-> IP Information Setting System".
Set the IP address of the request destination/source stations.
This setting is required when "Table Exchange System" or "Combination
Use System" is selected in "Station No. <-> IP Information Setting System".
CHAPTER 3 CONNECTION OF PROGRAMMING TOOLS AND GOT
[Built-in Ethernet Port Setting]
button
Setting range
• Automatic Response
System (default)
• IP Address Calculation
System
• Table Exchange
System
• Combination Use
System
C0000000
to
H
FFFFFFFC
H
• Decimal (default)
• Hexadecimal
1 to 239 (set in decimal)
1 to 64 (set in decimal)
00000001
to
H
DFFFFFFE
H
35
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents