Mitsubishi Electric Q03UDVCPU User Manual page 30

2.
Select "PLC Module" for "PLC side I/F".
Enter the IP address or host name of the CPU module in the "PLC side I/F Detailed Setting of PLC
Module" window, as shown below.
(For the host name, enter the name set in the Microsoft
3.
Set "Other Station Setting".
Select an item appropriate to the operating environment.
When performing relay communication to another network, make the following settings as well, and use
the connection destination specification of the programming tool to access another network.
( Page 31, Section 3.5)
28
® ®
Windows hosts file.)