Mitsubishi Electric Q03UDVCPU User Manual page 158

(2) CPU-module-dedicated subcommands
The CPU-module-dedicated subcommands affixed to an FTP command, "quote," are described below.
change
●
[Function]
[Specification format 1]
[Specification format 2]
[Example 1]
[Example 2]
keyword-set
●
[Function]
[Specification format]
[Example 1]
[Example 2]
[Example 3]
[Note]
*1 : This command is used only when a file password is registered in the file transfer target file. The QnUDE(H)CPU checks
a file password when a specified file is accessed.
156
Displays or changes the attribute of a file stored in the CPU module.
When displaying the file attribute:
quote change "file path name"
Either of the following is displayed as an execution result upon completion.
• When the specified file is read-only:
• When the specified file is writable and readable: ----- W
When changing the file attribute:
quote change "file path name" "attribute"
Use either of the following to specify the attribute.
• To change it to a read-only file: r
• To change it to a writable and readable file: w
When displaying the attribute of the file stored in the standard RAM:
quote change 3:\MAINSEQ1.QDR
When changing the attribute of the file stored in the standard RAM:
quote change 3:\MAINSEQ1.QDR r
Sets a file password registered in the file transfer target file into the Built-in Ethernet port
*1
QCPU.
Or, displays/clears the password set for FTP settings in parameter.
quote keyword-set [File password]
• File password :Specify the file password registered in the Built-in Ethernet port QCPU file.
To clear the set file password, specify "****".
One of the following is displayed as the execution result upon normal completion.
• When setting a file password
• When displaying a file password: 200 Keyword is "File password"
• When clearing a file password
When setting the password (1234)
quote keyword-set 1234
When displaying the password currently set for FTP settings in parameter
quote keyword-set
When clearing the password currently set for FTP settings in parameter
quote keyword-set ****
• One file password can be set for the FTP settings in Built-in Ethernet port QCPU
parameter.
When the file targeted for file transfer changes, re-set the file password of the target file
when a file password is also registered for the change target file.
• When logging in to the Built-in Ethernet port QCPU, the file password is initialized
(cleared) to "****".
----- R
: 200 Command successful
: 200 Command successful