Ti200, Ti300, Ti400, Ti450, Ti450SF6, Ti480
Users Manual
Keep the Imager attached to the charger until the battery condition icon shows a full charge. If you
remove the Imager from the charger before a full charge shows, it can have a reduced run-time.
When the battery is connected to ac power or the unit is in video mode, the Sleep Mode/Auto Off
feature is disabled automatically.
Optional 12 V Vehicle Charger
1. Connect the 12 V adapter into the 12 V accessory socket of the vehicle.
2. Connect the output to the ac power socket of the Imager.
3. Charge until the indicator shows full on the screen.
4. Disconnect the 12 V adapter and Imager when battery is fully charged.
To prevent damage to the Imager, remove it from the dc car charger before you start or
jump start the vehicle.
•
Always operate in the specified temperature range.
•
Do not store the batteries in extreme cold environments.
•
Do not attempt to charge the batteries in extreme cold environments.
Radio Frequency Data
See Table 13 for instructions on how to access digital copies of the Certificate IDs on the Imager.
To view the Radio Frequency Data Class B Instruction Sheet, visit
http://us.fluke.com/usen/support/manuals
General Specifications
Temperature
Operating
Storage
Relative Humidity
Altitude
Operating
Storage
Display
42
Caution
Caution
Do not incinerate the Product and/or battery.
and search for 4409209.
Ti200
Ti300
-10 °C to +50 °C (+14 °F to +122 °F)
-20 °C to +50 °C (-4 °F to +122 °F) without batteries
10 % to 95 % non-condensing
2000 m
12 000 m
8.9 cm (3.5 in) touchscreen diagonal landscape color VGA LCD with backlight
Note
Ti400
Ti450
Ti450SF6
Ti480