Ti200, Ti300, Ti400, Ti450, Ti450SF6, Ti480
Users Manual
5. Capture additional images as required. See Detailed Specifications for the maximum number of
images that can be stored with IR-PhotoNotes.
6. Push to save the pictures with the image.
To view an IR-PhotoNote annotation in memory:
1. Open the Memory menu.
2. Select a file to view. All files with IR-PhotoNotes annotations show with the preview file.
3. Push to view the photo annotations.
Audio
Audio (voice) annotation is only available in the .is2 file format. The audio is stored with the image so
you do not need to collate multiple files later.
To add, playback, or edit an audio file:
1. With an image in the buffer, push to open the Edit Image menu.
2. Select Add Audio.
3. Do the corresponding procedure below for the desired action.
Action
Add audio file
Playback audio file
Edit audio file
28
1. Push to record up to 60 seconds of audio.
2. The display updates to show the recorded time.
3. Push to pause the recorder.
4. Push to stop the recorder.
5. Push to review the audio file, or push to save the audio with
the image.
The audio file replays through the speaker.
1. Open the Memory menu.
2. Select a file to view. All files with audio annotations show with the
preview file.
3. Push to listen to the file.
4. Push again to pause the file.
5. Push twice to exit.
1. Before you save the file, push to review the audio file.
2. again to pause the file.
3. Push to append audio to the end of the file, or push to
replace the audio file.
4. Do the steps to add an audio file.
Procedure