Pioneer BDP-LX52 Operating Instructions Manual page 58

Problem
07
Multi-channel sound is not
output.
Noise can be heard when
outputting DTS Digital
Surround signals from the
DIGITAL OUT terminal.
192 kHz or 96 kHz digital
audio signals cannot be
output from the DIGITAL
OUT terminal.
Secondary audio or
interactive audio is not
output.
Sound is fast or slow.
After a disc is inserted,
Loading stays displayed and
playback does not start.
 is displayed in file names,
etc.
A message indicating low
memory appears while
playing a BD-ROM disc.
The DVD layer of BD and DVD
hybrid discs cannot be
played.
The CD layer of BD and CD
hybrid discs cannot be
played.
The BDMV format on BD-R/
-RE discs cannot be played.
58
En
Check
Is Output Terminal properly
set?
Is the audio output of the
connected AV receiver or
amplifier, etc., properly set?
Is multi-channel sound
selected?
Is the connected AV receiver
or amplifier compatible with
DTS Digital Surround?
Is HDMI Audio Out properly
set?
Are Dolby Digital Out and
DTS Out properly set?
When an HDMI cable is
connected, are audio signals
being output from devices
connected with cables other
than HDMI cables?
Are there too many files
recorded on the disc?
Is Hybrid Disc Playback
properly set?
Is Hybrid Disc Playback
properly set?
Remedy
Linear PCM (2-channel) audio signals are output from output terminals
other than the one set at Output Terminal under Audio Out. Set
Output Terminal properly (page 43).
Read the operating instructions of the connected AV receiver or
amplifier and check the audio output settings of AV receiver or
amplifier.
Use the menu screen or AUDIO to switch the disc's sound to multi-
channel.
If an AV receiver or amplifier that is not compatible with DTS Digital
Surround is connected to the DIGITAL OUT terminal, set DTS Out to
DTS  PCM (page 37).
It is not possible to output 192 kHz or 96 kHz digital audio signals from
this player's DIGITAL OUT terminal. The signals are automatically
converted to 48 kHz or less for output.
When listening to the sound from an HDMI OUT terminal, set HDMI
Audio Out to PCM (page 38).
When listening to the sound from an DIGITAL OUT terminal, set Dolby
Digital Out to Dolby Digital 1, DTS Out to DTS 1 (page 37).
When a Pioneer AV receiver or amplifier compatible with the PQLS
function is connected directly to the player's HDMI OUT terminal using
an HDMI cable, the PQLS function is activated when playing discs.
Because of this, the sound output from components other than the
ones connected by HDMI cable may be fast or slow. If this happens, set
PQLS to Off (page 38).
When a disc on which files are recorded is inserted, depending on the
number of files recorded on the disc, loading may take several dozen
minutes.
The characters that cannot be displayed on this player are displayed in
.
• Perform Individual/Shared Data Erase or Storage Format
(page 42).
• Perform Application Data Erase (page 42).
Set Hybrid Disc Playback to DVD (page 39).
Set Hybrid Disc Playback to CD (page 39).
To play the BDMV format on BD-R/-RE discs containing both BDMV
and BDAV formats, set BDMV/BDAV Playback Priority to BDMV
(page 39).