Pioneer BDP-LX52 Operating Instructions Manual page 43

 Registering or Changing the
password
Use this procedure to register or change the code
number required for the Parental Lock settings.
Select and set Parental Lock  Set Password 
1
Next Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) or / to input the
number, then press ENTER to set.
Use / to move the cursor.
3 Re-input the password.
Use the number buttons (0 to 9) or / to input the
number, then press ENTER to set.
Use / to move the cursor.
• To change the password, input the previously
registered password, then input the new password.
Note
• We recommend making a note of the password.
• If you forget the password, reset the player to the
factory default setting, then register the password
again (page 44).
 Changing the Parental Lock level for
viewing DVDs
Some DVD-Video discs containing scenes of violence, for
example, have Parental Lock levels (check the indications
on the disc's jacket or elsewhere). To restrict viewing
these discs, set the player's level to the level lower than
the discs.
Select and set Parental Lock  DVD-Video
1
Parental Lock  Next Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) or / to input the
number, then press ENTER to set.
Use / to move the cursor.
3 Change the level.
Use / to change, then press ENTER to set.
Note
• The level can be set to Off or between Level1 and
Level8. When set to Off, viewing is not restricted.
 Changing the Age Restriction for
viewing BD-ROMs
For BD-ROMs containing scenes of violence, for example,
viewing can be restricted by setting an age restriction for
the BD-ROMs.
Select and set Parental Lock  BDMV Parental
1
Lock  Next Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) or / to input the
number, then press ENTER to set.
Use / to move the cursor.
3 Change the age.
Use the number buttons (0 to 9) or / to input the
number, then press ENTER to set.
Use / to move the cursor.
Note
• When Age Restriction is set to 255, viewing is not
restricted.
 Changing the Country/Area code
Select and set Parental Lock  Country Code 
1
Next Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) or / to input the
number, then press ENTER to set.
Use / to move the cursor.
3 Change the country/area code.
Use / to change, then press ENTER to set.
• The the country/area code can also be changed using
the number buttons. Use / to move the cursor to
Number, use the number buttons (0 to 9) to input the
number, then press ENTER. Refer to Language Code
Table and Country/Area Code Table on page 47.
 Setting the output terminals
Set the terminals from which the player's video and audio
signals are to be output.
Select and set Options  Output Terminal 
1
Next Screen.
Use / to select, then press ENTER.
2 Select and set the video and audio output
terminals.
Select the actually connected video and audio output
terminals.
Use /// to select, then press ENTER.
For details on the settings, refer to step 4 on page 18.
When COMPONENT VIDEO or VIDEO is selected for
Video, no sound is output from the HDMI OUT terminal
(a warning message is displayed).
06
43
En