Pioneer BDP-LX52 Operating Instructions Manual page 38

Setting
06
HDMI High Speed
Transmission
The player's setting screen is closed if the output video resolution is switched by changing the HDMI High Speed Transmission
setting.
HDMI Color Space
Normally it is recommended to set this to Auto. When set to Auto, the optimum video signals for your TV are output.
HDMI Audio Out
KURO LINK
Display Power On
* Only valid when KURO
LINK is set to On.
Display Power Off
* Only valid when KURO
LINK is set to On.
PQLS
* Only valid when KURO
LINK is set to On.
IP Address
Proxy Server
Display Network
Configuration
Connection Test
38
En
Options Explanation
On Select this when connected with a High Speed HDMI™ cable (page 13).
Off Select this when connected with a Standard HDMI™ cable (page 13).
Auto Select this to automatically switch the video output between YCbCr and RGB
signals according to the connected equipment.
YCbCr 4:4:4 Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 4:2:2 Select this to output the video signals as YCbCr 4:2:2 signals.
RGB (16 to 235) Select this to output the video signals as RGB signals. Choose this if the
colors seem too dense and all the dark colors are displayed in a uniform black
when RGB (0 to 255) is selected.
RGB (0 to 255) Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright when RGB (16 to 235)
is selected.
Auto The signals are output with as many audio channels as possible. In cases
when the number of channels does not decrease when the signals are output
as such without converting them to linear PCM, they are output as such
(page 45).
PCM Select this when you want the secondary audio and interactive audio signals
to be mixed for output or when you want to output prioritizing sampling
frequency over the number of channels (page 45).
Off Select this when you do not want to output the audio from the HDMI output
terminal.
On
Select this to control the player with the remote control of the AV device
connected using an HDMI cable. Also refer to About KURO LINK function on
page 14.
Off Select this when you do not want to control the player with the remote control
of the AV device connected using an HDMI cable.
On Select this when you want the TV to turn on each time playback is started or
the Home Menu or Home Media Gallery is displayed on the player.
Off Select this when you do not want the TV to turn on each time playback is
started or the Home Menu or Home Media Gallery is displayed on the player.
On Select this when you want the player's power to turn off together with the TV's
power.
Off Select this when you do not want the player's power to turn off together with
the TV's power.
Auto Enables PQLS function (page 14).
Off Disables PQLS function (page 14).
Select this to set the IP address of the player and DNS server (
Only set the proxy server if so instructed by your Internet service provider (
Select this to display a list of the network settings (
Select this to test the network connection (page 42).
page 41
).
page 41
page 41 ).
).