Setting The Parental Lock - Pioneer SUPERTUNERIIID+ AVH-P7850DVD Operation Manual

Section
19 Setting up the DVD player
Notes
! When playing discs that do not specify
PAN SCAN, playback is with LETTER BOX
even if you select PAN SCAN setting. Confirm
whether the disc package bears the
mark. (See page 12.)
! Some discs do not enable changing of the TV
aspect. For details, refer to the disc's in-
structions.

Setting the parental lock

Some DVD video discs let you use parental
lock to restrict children from viewing violent
and adult-oriented scenes. You can set the par-
ental lock to your desired level.
! When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
You need to have registered a code number for
playing back discs with parantal lock.
1 Touch PARENTAL on the DVD setup
menu.
2 Touch 0—9 to input a four digit code
number.
# To cancel the inputted numbers, touch C.
3 Touch ENTER.
The code number is set, and you can now set
the level.
4 Touch any of 1—8 to select the desired
level.
The parental lock level is set.
! 8 – Playback of the entire disc is possible
(initial setting)
100
En
! 7 to 2 – Playback of discs for children and
non-adult-oriented discs is possible
! 1 – Playback of discs for children only is
possible
16 : 9 LB
Notes
! We recommend to keep a record of your code
number in case you forget it.
! The parental lock level is recorded on the disc.
Look for the level indication written at the disc
package, included literature or on the disc it-
self. Parental lock of this unit is not possible if
a parental lock level is not recorded in the
disc.
! With some discs, the parental lock may be ac-
tive only on the scenes with certain levels. The
playback of those scenes will be skipped. For
details, refer to the instruction manual that
came with the discs.
Changing the level
You can change the set parental lock level.
1 Touch PARENTAL on the DVD setup
menu.
2 Touch 0—9 to input the registered code
number.
3 Touch ENTER.
This enters the code number, and you can now
change the level.
# If you input an incorrect code number, the
is displayed. Touch C and input the cor-
icon
rect code number.
# If you forget your code number, refer to If you
forget your code number on the next page.
4 Touch any of 1—8 to select the desired
level.
The new parental lock level is set.