Lever head
A
head "A" counter-clockwise. The lock will be
released.
2. Turn the lever-head "A" clockwise as you hold
You can adjust how quickly the
stick returns to neutral.
The tension of the self-return type stick lever can
1. First, remove the battery cover on the
bottom of the transmitter. Next, unplug the
battery wire and remove the battery from
the transmitter.
2. Next, using a hand, remove the transmitter's
side cover (rubber). When using Mode 2, you
will need to remove the side cover to expose
the tension screw.
< Before Use >
28
Lever head
B
3. Using your hand remove the transmitter's rear
rubber grips.
*It is difficult to remove rear grips from the central
site of a transmitter.
Therefore, remove from the outside of rear grips.
Rear Grip
4. Use a 1.5mm hexagonal wrench to adjust
the spring strength as you prefer by turning
the adjusting screw of the stick you want to
adjust.
CAUTION: Loosening the screw too much
can interfere with the internal stick operation.
Side cover
It removes
from here
Rear Grip