General And Mounting Dimensions; Fcc Warning Label - Omega HHF1001A User Manual

5
Wireless PC Communications
Standby (SB) yellow indicator light - The yellow indicator light marked "SB" on
the front of the receiver will blink continuously during normal operation. This
indicates that the receiver is in Standby mode and is waiting for incoming data
from the wireless transmitter.
Power (PWR) Green indicator light is for power indication.
The HHF1000 series comes with an additional Windows based user application.
This program, TC Central, is used to monitor and log air velocity and air
temperature wirelessly from the HHF1000 device. In addition, from the
"Tools" menu, you can select "Configure End Device...", to Run the End Device
Configuration Wizard. You can set the unit ID (Transmitter Address) and data
transmission interval using this feature.
5-2
Figure 5-2. General And Mounting Dimensions
FCC ID: OUR-XBEEPRO
IC #4214A-XBEEPRO
This device complies with Part 15 of
the FCC rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful
interference.
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
Made in U.S.A.
Figure 5-3. FCC Warning Label
F
!