Section 6 - Specifications - Omega HHF1001A User Manual

6
Specifications

Section 6 - Specifications

GENERAL
Range
Accuracy
Display Resolution
Sensor Probe
Velocity/Temperature Sensor:
Response Time:
Calculated Air Velocity Values: Maximum & Minimum, 250 msec response time
Calculated Temperature Values: Maximum & Minimum, 250 msec response time
Calculated Volume Air Flow:
Cross Sectional Area:
High Alarm Set Point, Velocity: Maximum range default –
Low Alarm Set Point, Velocity: Minimum Range default –
High & Low Alarm Indication: HAL or LAL icon flashes on the display
Alarm Deadband:
Power:
Battery Life:
Low Battery Indication
AC Adapter:
Operating Ambient Temperature
Operating Relative Humidity:
6-1
Air Velocity:
Air Temperature:
Air Velocity:
Air Temperature:
Air Velocity:
Air Temperature:
Standard:
Remote Telescopic:
Output Voltage:
Output Plug (Female):
Sensor Probe:
Meter:
0-5000 FPM (0 to 25.4 m/sec)
-40 to 93ºC (-40 to 199ºF)
1.5% Full scale
0.5% Full scale
1 FPM, 0.01 m/s, 0.01 MPH, 0.01 Km/h
0.1 Degree
6.3 OD x 305 mm (1⁄4 OD x 12") –
workable length 304 Stainless Steel
6.3 OD x Adjustable from 254 to 914mm
(1/4 OD x 10 to 36") – 304 Stainless Steel
One 100 ohms RTD, Two 1000 ohms RTD
250 msec default - 0 to 90% Display Final value
(Programmable from 250 msec to 2 seconds)
Displays in cubic feet per minute (CFM) or
cubic meters per minute (CMM)
20 Sq-Inches default
Programmable from 1 to 400 Sq-Inches via
keypad
Programmable via keypad
Programmable via keypad
25 FPM
9V Lithium Battery, or ac adapter
6 Hours, continuous
BAT Icon on the LCD
100 to 240 Vac, 50-60 Hz UL, CE, FCC Marking
9V @ 1.7A
Center positive, coax 2.0/5.5/10mm
-40 to 93ºC (-40 to 199ºF)
0 to 50ºC (32 to 122ºF)
0 to 95% RH without condensation