JVC KD-S713R Service Manual page 5

Removing the main board
1. Remove the front chassis.
2. Remove the bottom cover.
3.
Remove the two screws B attaching the main
board on the bottom of the body.
4. Remove the three screws C attaching the main
board on the back of the body.
5. Disconnect the connector CN501 from the CD
mechanism assembly.
Removing the CD mechanism assembly
1. Remove the front chassis.
2. Remove the bottom cover.
3.
Remove the main board.
4. Remove the three screws D attaching the CD
mechanism assembly from the top cover.
Removing the front board
1.
Remove the front chassis.
2.
Remove the four screws E attaching the rear
cover on the back of the front panel unit.
3.
Remove the front board from the front panel unit.
(See Fig.4 and 5)
B
C
(See Fig.6)
(See Fig.7 and 8)
CN501
Fig. 4
Fig. 5
CD mechanism assembly
D
D
Fig. 6
E
E
Fig. 7
Fig. 8
KD-S713R/KD-S711R
Main board
B
C
D
Top cover
E
E
1-5