Disassembly Method - JVC KD-S713R Service Manual

KD-S713R/KD-S711R

Disassembly method

Removing the front chassis (See Fig.1)
1.Insert a screwdriver to the joints a on the side of
the front chassis and two joints b on the right
side, then detach the front chassis toward the
front side.
Removing the heat sink (See Fig.2)
1.Remove the three screws A attaching the heat
sink on the left side of the body, and remove the
heat sink.
Removing the bottom cover (See Fig.3)
1.
Turn the body upside down.
2. Insert a screwdriver to the two joints c and two
joints d on the both sides of the body and the
joint e on the back of the body, then detach the
bottom cover from the body.
1-4
a
a
Front chassis
Fig. 1
A
A
Fig. 2
c
e
Fig. 3
b
b
A
d