Cran Kshaft - Suzuki FA50 Service Manual

SJ:R VICING PROCEDL'RL �·
3-10
...
Spacer
•
Clean the in let port mounting su rface and
the case su rface.
liquid gasket to ® .
• When insta l l ing the crankshaft, apply the
SUZUKI
Bond No. 1 201
• Be sure to set the spacer when instal l ing
the oil pump.
the groove @ .
• Match the projecting part of oil pump and
• Check the oil seal and the bearing for
damage or excessive clearance.
• Apply grease to the oil sea l .
• Apply o i l to the bearing.
CRANKS HAFT
•
Bearing, oil seal
1
99104-31 1 00
Check for damage and bent reeds.
careful not to bend the reed valve stopper .
Reed valve
•
Use a crankshaft remover to p revent
damage to the crankshaft bearing and
crankshaft.
Crankshaft remover
. ---- .
---
B e
•
09920-1 3 1 1 1
,