Port Forwarding - D-Link AC1900 User Manual

Section 4 - Con guration
Port forwarding allows you to specify a port or range of ports to open
for speci c devices on the network. This might be necessary for certain
applications to connect through the router. In the Features menu on the bar
on the top of the page, click
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the
you edit or create a rule, the following options will appear:
Enter a name for the rule.
Name:
Enter the IP address of the computer on your local network that you
Local IP:
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
Enter the TCP ports that you want to open. You can enter a single
TCP Port:
port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000).
Enter the UDP ports that you want to open. You can enter a single
UDP Port:
port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000).
Use the drop-down menu to select the time schedule that the rule
Schedule:
will be enabled on. The schedule may be set to
you can create your own schedules in the Schedules section. Refer
to Schedule on page 81 for more information.
Click Save when you are done.
D-Link DIR-878 User Manual

Port Forwarding

.
button. Click Save when you are done. If
, or
69