Virtual Server - D-Link AC1900 User Manual

Section 4 - Con guration
The virtual server allows you to specify a single public port on your router for
redirection to an internal LAN IP address and Private LAN port. To con gure
the virtual server, from the Port Forwarding page click Virtual Server. To
return to the main Port Forwarding page, click
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the
you edit or create a rule, the following options will appear:
Enter a name for the rule. Alternatively, select the protocol/Application
Name:
from the drop-down menu.
Enter the IP address of the computer on your local network that you
Local IP:
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
Select the protocol of the tra c to allow or deny (TCP, UDP, Both,
Protocol:
or Other).
If you entered Other above, enter the protocol number.
Protocol Number:
Enter the public port you want to open.
External Port:
Enter the private port you want to open.
Internal Port:
Use the drop-down menu to select the time schedule that the rule
Schedule:
will be enabled on. The schedule may be set to
you can create your own schedules in the Schedules section. Refer
to Schedule on page 81 for more information.
Click Save when you are done.
D-Link DIR-878 User Manual

Virtual Server

button. Click Save when you are done. If
.
, or
70