Static Routes - D-Link AC1900 User Manual

Section 4 - Con guration
The Static Routes section allows you to de ne custom routes to control how
data tra c is moved around your network.
In the Features menu on the bar on the top of the page, click Static Routes.
To con gure IPv6 rules, click IPv6 and refer to IPv6 on page 73. To return to the
main IPv4 static routes page, click IPv4.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the
If you edit or create a rule, the following options will appear:
Enter a name for the rule.
Name:
Enter the IP address of packets that will take this route.
Destination
Network:
Enter the subnet mask of the route.
Mask:
Enter your next hop gateway to be taken if this route is used.
Gateway:
The route metric is a value from 1 to 16 that indicates the cost of using
Metric:
this route. A value 1 is the lowest cost and 15 is the highest cost.
Select the interface that the IP packet must use to transit out of the
Interface:
router when this route is used.
Click Save when you are done.
D-Link DIR-878 User Manual

Static Routes

button. Click Save when you are done.
72