Table of Contents
Advertisement
8.2 - Global Procedures
The global procedures described below show the end user how to perform functions
such as checking version of software, ID information and how to access the tracker
(trk>) prompt.
These procedures may be referenced to while performing other processes so they are
described here to familiarize the user with these operations prior to entering other
functional sections of the manual.
8.2.1 - Accessing trk> prompt (Debug mode)
The debug prompt allows interaction with the controller using a command line type
interface.
In the debug prompt you can perform any function you would using the GUI. Warning,
the debug interface should only be used by (or as directed by) a factory authorized
technician.
1. Tap three times on the upper left hand corner of the screen.
Tap Here
2. Do this repeatedly until the screen turns white as seen below.
46
7451041 - V2.2
Advertisement
Table of Contents
Troubleshooting
