Wv750 Installation Information - Winegard WV750 Product Manual

5.2 WV750 Installation Information

The Winegard WV750 antenna should be mounted to a secure platform using the
rails provided. The following diagrams show the mounting point dimensions as
well as the wiring panel at the base of the antenna.
1. Mounting points -
All mounting points should be connected to a cross member or secure mounting
point on the vehicle roof or mobile platform. Use 8 – 3 /8 inch x 1 inch (10 mm x
25 mm) Grade 8 bolts with washers and appropriate lock nut.
2. Wiring Bulkhead-

The RX cable is F connector terminated to go directly to the modem.

The ODU power/communication cable is F connector terminated and connects
the antenna to the Winegard 2-Way Controller ODU port. The picture below
shows the wiring plate.
7451041 - V2.2
10