Table of Contents
Advertisement
9. ADVANCED OP MODE screen-
After completing the Compass Heading screen on the previous page, the controller
will advance to the ADVANCED OP MODE screen.
In this screen there is only one mode supported for field deployment, Normal Search
Mode.
Normal Search Mode (Default) -
As the name implies, Normal Search Mode is the factory default setting.
If the "Normal Search Mode" is not highlighted select it and press the "NEXT"
button to advance to the MODEM SELECTION screen.
10. NETWORK SETUP screen -
At the top of the NETWORK SETUP screen the header section details if the Network
Adapter is currently in DHCP or STATIC mode.
The Network Adapter can be placed in either DHCP or STATIC mode. Network
parameters such as IP, Mask, Gateway and DNS address are available when the system
is in STATIC mode.
7451041 - V2.2
27
Advertisement
Table of Contents
Troubleshooting
