JVC XV-DDV1SL Service Manual page 10

3.1.3 Removing the hard disc (See Figure 4, Figure 5)
• Prior to the following procedure, remove the top cover and the
front panel assembly.
(1) Disconnect the card wire on each connector
CN603 on the hard disc control board.
(2) Disconnect the socket wire from each connector
CN94 on the power supply board.
(3) Remove the four screws F attaching the hard disc control
board.
(4) Remove the power cord and IDE cable connected to the
hard disc.
(5) Remove the four screws G attaching the hard disc bracket.
(6) Remove the four screws H attaching the hard disc.
1-10 (No.XA010)
CN602 and
CN93 and
CN94 CN93 F Power supply board
CN602 CN602
CN603 CN603
F
Hard disc control board
Fig.4
Hard disc control board
IDE cable
G G
H H
G G
H H
Hard disc
Fig.5
F
F
Power cord
H
G
H
G