DataCard CR805 Product Manual page 13

A. The CR805 printer is field upgradeable for magnetic stripe encoding, smart card options, 200
card input hopper, and the Commercial Lamination Module* by a Datacard authorized service
representative or a trained Datacard Channel Partner. See special notes in upgrade section on
what to order. (*Ability to add Commercial Lamination Module coming soon)
Q: Is smart card encoding field upgradeable for the CR805 Retransfer Card Printer?
A: Yes, smart card encoding for the printer can be upgraded in the field by a Datacard authorized
service representative or a trained Datacard Channel Partner. See special notes in upgrade
section on what to order.
Q. How many cards can the output hopper hold?
A. The standard output hopper holds 25 cards, but an optional 125 card output hopper may be
purchased.
Q. What communication interfaces will the CR805 Retransfer printer support?
A. USB and Ethernet connectivity are supported.
Q. What driver does the CR805 Retransfer printer use?
A. The CR805™ Card Printer uses XPS Driver 7.0.
Q. Is there a reject bin in the printer?
A. Yes – it holds up to 6 cards.
Q. How does the card debower work and can it be adjusted?
A. The card debower holds the card in a position to reduce the bow in the card. You can turn the
debower off via settings in the printer manager.
Q. Is the hardware lock option field upgradeable?
A. No, this must be purchased at time of printer order.
Q: What operating systems support the CR805 Retransfer printer?
A: The CR805™ Card Printer is supported by the following Microsoft operating systems: Windows
10, (32/64 bit) Windows 8.1 (32/64 bit), Windows 7 (32/64 bit), Windows 2008 R2 Server (64 bit),
Windows 2012 R2 Server (64 bit).
Q: Where is the diagnostic program located?
A: The diagnostic tools are now built into the CR805 Retransfer printer and are accessible through
the browser-based Print Manager.
Q: Are two different printheads needed to support color printing and monochrome
printing?
A: No, a single printhead produces excellent print results for both color and monochrome printed
cards.
Q: What are the power requirements?
A: The CR805 Retransfer printer requires 100-240V, 50/60 Hz.
SUPPLIES
Q: Why are there two options for retransfer film? How do I know which one to use?
Page 13 of 15
Entrust Datacard Confidential