Frequently Asked Questions - DataCard CR805 Product Manual


Locks

Easy to install in the field Magnetic stripe and smart card field upgrade kits. No tools are required.
Special note: When upgrading an existing card printer, completely new upgrade kit must be
orders to replace existing kit. For example, if existing printer contains magstripe encoder, and
end customer wants to upgrade to smartcard encoder, then they must order an upgrade kit that
has both.
UPGRADE KITS
When ordering an upgrade kit, a model serial number will be requested.
513088-002 Upgrade Kit, ISO Magnetic Stripe
513088-003 Upgrade Kit, JIS Magnetic Stripe
Upgrade Kit, DUALi Single Wire Contact/Contactless Encoder, ISO 7816, ISO 14443, Mifare,
513090-001
Desfire & Felica
Upgrade Kit, ISO Magnetic Stripe, DUALi Single Wire Contact/Contactless Encoder, ISO
513090-002
7816, ISO 14443, Mifare, Desfire & Felica
Upgrade Kit, JIS Magnetic Stripe, DUALi Single Wire Contact/Contactless Encoder, ISO
513090-003
7816, ISO 14443, Mifare, Desfire & Felica
513092-001 Upgrade Kit, Loosely Coupled Identive Smart Card Contact/Contactless Reader/Encoder
Upgrade Kit, ISO Magnetic Stripe, Loosely Coupled Identive Smart Card Contact/Contactless
513092-002
Reader/Encoder
Upgrade Kit, JIS Magnetic Stripe, Loosely Coupled Identive Smart Card Contact/Contactless
513092-003
Reader/Encoder
513265-001 Upgrade Kit, Loosely Coupled, pcProx Plus ID Contactless Smart Card Encoder (Read Only)
Upgrade Kit, ISO Magnetic Stripe, Loosely Coupled, pcProx Plus ID Contactless Smart Card
513265-002
Encoder (Read Only)
Upgrade Kit, Loosely Coupled, iCLASS by HID Contactless Smart Card Encoder (Read-
513266-001
Write)
Upgrade Kit, ISO Magnetic Stripe, Loosely Coupled, iCLASS by HID Contactless Smart Card
513266-002
Encoder (Read-Write)

FREQUENTLY ASKED QUESTIONS

GENERAL
Q. What is the print speed of the Entrust Datacard® CR805 Retransfer Printer?
A. The print speed for the CR805 is:

Up to 100 cards per hour front side CMYKP ribbon

Up to 66 cards per hour front side CMYKP-KP ribbon (back side K)
Q: What standards does the magnetic stripe encoder support?
A: The magnetic stripe encoder supports ISO 7811 standards and high- and low-coercivity.1, 2 or
3 track encoding and JIS encoding.
Q: What encoding protocols are supported by the smart card encoder?
A: The encoder supports ISO 14443 A/B and ISO 7816 protocols.
Q. Is the CR805 printer field upgradeable?
Page 12 of 15
Entrust Datacard Confidential