Fast Flush; (Procontractor And Ironman Models Only); Watchdog ™ Protection System (Procontractor And Ironman Models Only) - Graco 695 Operation Manual

Fast Flush

(ProContractor and IronMan models only)

To flush the hose and gun at an accelerated speed, per-
form the following steps:
1. Perform steps 1 - 3 of Cleanup, page 22.
2. Squeeze gun trigger and turn prime valve down to
DRAIN position and then over to FAST FLUSH.
3. Continue flushing system until fluid appears clear.
332916E
ti22940a
Fast Flush (ProContractor and IronMan models only)
™
WatchDog Protection System
(ProContractor and IronMan models only)
Pump stops automatically when material pail is empty.
To Activate:
1. Perform Startup.
2. Turn WatchDog switch ON and WD ON displays.
EMPTY displays/flashes and pump stops when
Watchdog protection system detects an empty
material pail.
3. Turn WatchDog switch OFF. Add material or rep-
rime sprayer. Turn pump switch OFF and ON to
reset WatchDog protection system. Turn WatchDog
switch back ON to continue to monitor material
level.
ti22938a
ti22033a
ti22939a
17