Gateway Rear Panel; Logging In To Your Gateway - NETGEAR CG3000D User Manual

Gateway Rear Panel

The rear panel includes the following connections, viewed from left to right, as illustrated in the
following illustration:
Figure 1-2
• Four Ethernet LAN ports: Use these ports to connect local computers.
• USB port: The USB port is a USB host and can be used for connecting a USB hard drive,
flash drive, or printer.
• Coaxial cable connector: Attach coaxial cable to the cable service provider's connection.
• Power: AC power adapter input.
Note: You can return the gateway to its factory settings. On the bottom of the gateway,
press and hold the Restore Factory Settings button
gateway resets, and returns to its factory settings. See
Appendix

Logging In to Your Gateway

You can log in to the gateway to view or change its settings. Links to Knowledge Base and
documentation are also available on the gateway main menu.
Note: Your computer must be configured for DHCP. For help with configuring DHCP, see
the documentation that came with your computer or see the link to the online
document in
Connecting the Gateway
Wireless Cable Gateway CG3000D/CG3100D User Manual
USB
port
Ethernet
LAN ports
A.
"Preparing a Computer for Network Access" in Appendix
v1.0, September 2009
Coaxial Power
cable adapter
connector input
for over 7 seconds. The
"Factory Default Settings" in
Power On/Off
button
B.
1-3