Timer Recording With The Vcr Plus+ Programming System - Philips/Magnavox VCR 462 Owner's Manual

Timer Recording With the VCR Plus+ Programming System (cont'd) 41
5
Press the Number 1 button to record in SP speed or the
Number 2 button to record in SLP speed. You cannot use
the (Tape) SPEED button at this time.
ONE TIME PROGRAM
PROGRAM 2
CHANNEL 25
TIME ON 10:00 AM
TIME OFF 01:00 PM
REC SPEED SLP
START DATE 07/10/97
THU.
PUSH 1=SP OR 2=SLP
TO END PUSH EXIT
6
Press the EXIT/STATUS button. PROGRAM WAS COM-
PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. (If PROGRAM NOT COMPLETED
appears, begin again from step 1.) After five seconds, the on-
screen display will disappear.
7
Press the POWER button to turn off the VCR. The VCR
must be turned off for a timer recording to take place.
The TIMER light will appear on the display panel of the VCR when
you turn off the VCR. The TIMER light and the Cassette-Inside
light will flash if there is not a tape in the VCR.
The VCR must be off for a timer
recording to take place!
Make sure a tape is in the VCR.
CBL/DSS VCR
EJECT POWER
7
VOL CHANNEL
F.ADV
PAUSE/STILL
PLAY
REW
VCR PLUS+
/ENTER
STOP
6
EXIT/STATUS MENU
1 2
5
4 5
7 8
100 0
REC /OTR
INDEX
...
VAR. SLOW
TRACKING
SPEED VCR/TV SLOW
REMOTE LOCATOR
Helpful Hints
• To exit the VCR Plus+ programming
system at any step, press the
EXIT/STATUS button.
• PROGRAM NOT COMPLETED/
CLASH may appear on-screen for
five seconds at step 6 if the timer
recording you programmed overlaps
with another timer recording. Then,
the timer recording menu will
appear. To cancel the overlapping
timer recording, follow the steps on
page 37.
TV
MUTE
FF
LIGHT
CLEAR
3
6
9
GO-TO
MEMORY
SKIP
SEARCH