Timer Recording With The Vcr Plus+ Programming System - Philips/Magnavox VCR 462 Owner's Manual

40 Timer Recording With the VCR Plus+ Programming System

Follow the steps below to program a timer recording using
PlusCode programming numbers. Before you begin make sure:
• Channels are programmed. Details are on page 12.
• The clock is set. Details are on pages 14 - 17.
• There is a tape in the VCR. Make sure the tape's record tab is
intact and the tape is long enough to record the program(s).
• The VCR is in VCR position (the VCR light will appear on the
display panel of the VCR). If the VCR light does not appear,
press the VCR/TV button once.
Complete each step within 60 seconds of completing the
previous step. If you don't, you may start again at step 1.
1
Press the VCR button.
2
Press the VCR PLUS+/ENTER button. The on-screen display
shown below will appear.
VCR PLUS+ PROG.
VCR PLUS +
TO END PUSH EXIT
3
Use the Number buttons to enter the PlusCode program-
ming number of the program you wish to record. (This
number is different for every program, and it can be four to eight
digits long.) Finally, press the VCR PLUS+/ENTER button.
VCR PLUS+ PROG.
VCR PLUS+ 13285
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
4
Select a ONCE, DAILY, or WEEKLY recording.
To record the program one time, press the Number 1 button to
select ONCE. To record the same program every day from
Monday through Friday, press the Number 2 button to select
DAILY. To record the same program every week on the same day
(such as every Saturday), press the Number 3 button to select
WEEKLY.
VCR PLUS+ PROG.
1 ONCE
2 DAILY
3 WEEKLY
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
1
CBL/DSS VCR
EJECT POWER
VOL CHANNEL
F.ADV
PAUSE/STILL
PLAY
REW
2
VCR PLUS+
/ENTER
STOP
EXIT/STATUS MENU
4
1 2
4 5
7 8
100 0
REC /OTR
INDEX
...
VAR. SLOW
TRACKING
SPEED VCR/TV SLOW
REMOTE LOCATOR
Helpful Hints
• If you enter an incorrect PlusCode
programming number at step 3,
ERROR will appear briefly, then the
previous menu will appear. Enter
the correct PlusCode programming
number.
• If ERROR appears at step 4 when
you select DAILY, the PlusCode pro-
gramming number you entered is
for a program that is broadcast on
Saturday or Sunday. The program
cannot be recorded repeatedly from
Monday through Friday.
TV
MUTE
FF
LIGHT
CLEAR
3
6 3
9
GO-TO
MEMORY
SKIP
SEARCH