Manual Pbs Channel Selection - Philips/Magnavox VCR 462 Owner's Manual

16 Setting the Clock (cont'd)

Manual PBS Channel Selection

1
Press the VCR button, then press the MENU button.
2
Press the Number 5 button to select SET CLOCK. CABLE
BOX USERS SET CLOCK MANUALLY will appear on-screen
briefly. Then, the menu shown below will appear. (If AUTO
CLOCK is set to OFF, SET TIME ZONE will not be available.)
SET CLOCK
1 AUTO CLOCK (ON)
2 DAYLIGHT SAV TIME (ON)
3 SET MANUAL CLOCK (OFF)
4 SET TIME ZONE
(AUTO)
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
3
If (ON) appears to the right of AUTO CLOCK, press the
Number 1 button twice. If (OFF) appears to the right of
AUTO CLOCK, press the Number 1 button once.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
1 SET PBS CH. AUTO
2 SET PBS CH. MANUAL
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
4
Press the Number 2 button to select SET PBS CH. MAN-
UAL to tell the VCR the PBS channel from which to take the
time.
5
Use the Number buttons to enter your PBS channel num-
ber. (If you make a mistake, press the CLEAR button.) Finally,
press the EXIT/STATUS button.
6
The Time Zone Selection menu will appear. Press one Number
button to enter the single-digit code for your Time Zone.
7
Press the EXIT/STATUS button. You will be prompted to
turn off the VCR.
Press the EXIT/STATUS button again, then press the
POWER button to turn off the VCR. Auto will flash in the
display panel until the clock is set. Leave the VCR power off until
the clock is set.
CBL/DSS VCR
EJECT POWER
7
VOL CHANNEL
F.ADV
PAUSE/STILL
PLAY
REW
VCR PLUS+
/ENTER
STOP
5
EXIT/STATUS MENU
3
1 2
4 5
7 8
100 0
REC /OTR
INDEX
...
VAR. SLOW
TRACKING
SPEED VCR/TV SLOW
REMOTE LOCATOR
Helpful Hints
• The time will be updated at the top
of each hour (except at 11 p.m.,
midnight, 1 a.m. and 2 a.m.).
• To see the time on the display
panel, press the EXIT/STATUS but-
ton repeatedly.
• If - - : - - appears on the display
panel after you turn off the VCR,
the VCR could not find the time.
Repeat steps 1 - 7 above, entering
a different PBS channel at step 5.
Or, set the clock following the steps
on page 17.
1
TV
MUTE
FF
LIGHT
CLEAR
4
3
2
6
9
6
GO-TO
MEMORY
SKIP
SEARCH