GE JTP16 Use And Care Manual page 6

1. BAKE. Press this pad to select the bake function.
2. CONV. BAKE. Press this pad to select baking
with convection.
3. PROBE. Press this pad when using the probe to
cook food.
4. TIME DISPLAY. Shows the time of day, the times
set for the timer or automatic oven operation.
5. PROGRAM STATUS. Words light up in the
display to indicate what is in the time display.
Programmed information can be displayed at any
time by pressing the pad of the operation you want
to see. For example, you can display the current
time of day while the timer is counting down by
pressing the CLOCK pad.
6. OVEN OR PROBE TEMPERATURE AND
BROIL DISPLAY. Shows the oven temperature,
probe temperature or broil setting.
7. FUNCTION INDICATORS. Lights up to show
whether the oven is in the bake, broil, convection
bake, convection roast, self-clean or set mode or if
the probe is selected.
8. INCREASE. Short taps to this pad increase the
time or temperature by small amounts. Press and
hold the pad to increase the time or temperature
by larger amounts.
9. COOK TIME. Use this pad for Timed Bake,
Timed Convection Bake and Timed Convection
Roast operations.
10. TIMER. Press this pad to select the timer
function. The timer does not control oven
operations. The timer can time up to 9 hours
and 55 minutes.
To set timer, first press the TIMER pad. Then
press the INCREASE or DECREASE pad to
change the time.
To cancel the timer, press and hold the TIMER
pad until the word "TIMER" disappears from
the display.
6
—
CLEAR/OFF
11. BROIL. Press this pad to select the broil function.
12. CONV. ROAST. Press this pad to select roasting
with convection.
13. AUTO SELF CLEAN. Press this pad to select
the self-cleaning function. See the Operating the
Self-Cleaning Oven section.
14. OVEN LIGHT. Press this pad to turn the oven
light on or off.
15. CLEAWOFF. Press this pad to cancel all oven
operations except Clock and Timer.
16. DECREASE. Short taps to this pad decrease the
time or temperature by small amounts. Press and
hold the pad to decrease time or temperature by
larger amounts.
17. STOP TIME. Use this pad along with the COOK
TIME or AUTO SELF CLEAN pad to set the oven
to start and stop automatically at a time you select.
18. CLOCK. To set the clock, first press the CLOCK
pad. Then press the INCREASE or DECREASE
pad to set the time of day. Press the CLOCK pad
to start.
If "F-" and a number flash in the display and
the oven control signals, this indicates function
error code. Press the CLEAWOFF pad. Allow the
oven to cool for one hour. Put the oven back into
operation. If the function error code repeats,
disconnect power to the oven and ca!l for service.
COOK
TIMER
TIME
STOP
CLOCK
TIME