Download Print this page
GE  Profile JTP17SCSS Dimensions And Installation Information
GE  Profile JTP17SCSS Dimensions And Installation Information

GE Profile JTP17SCSS Dimensions And Installation Information

30" single wall oven

Advertisement

Quick Links

TM
JTP17SCSS - GE Profile
Undercounter Installation (in inches)
Gas or electric cooktops may be installed over
this oven. See cooktop installation instructions
for cutout size. See label on top of oven for
approved cooktop models.
25
23-1/2" MIN.
Cutout depth
Top and/or side
fillers may be
necessary if unit
28-1/2'' MIN.
is positioned
28-5/8'' MAX.
between
27-1/4'' MIN.
existing cabinets
27-5/16'' MAX.
Cutout height
3/4'' Support
platform required
Match toe kick height
front and two sides
Note: Oven is rated for use only under the following cooktops:
• GE 30" and 36" electric coil and CleanDesign cooktops (Excluding Induction)
• GE 30" and 36" gas standard and sealed burner cooktops
Note: Gas or electric cooktops may be installed over this oven. See cooktop installation
instructions for cutout size. See label on back of oven for approved cooktop models.
Installation Information: Before installing, consult installation instructions [Pub. No. 31-10125]
packed with product for current dimensional data and for alternate installation options.
Specification Revised 11/00
30" Single Wall Oven
Gas and electrical connections for
Junction box
Gas
gas cooktop must be located in an
location
connection
adjacent accessible location to the right.
240/208V
For a 36" gas cooktop, the connections
5
may be made to the left.
120 Volt
Outlet
1-1/2"
Countertop
Allow 11/16''
22'' MIN. above
overlap over side
36'' MIN.
support platform
edges of cutout
24
4'' To 4-1/2 '' Toe kick allowable
Optional Custom Installation for 30" CleanDesign
(Excluding Induction) or Sealed Burner Gas Cooktop (in inches)
1-1/2" Typical countertop
Free space
1-1/2" MIN.
30-7/16
27-1/4" MIN.
27-5/16" MAX.
Cutout height
5-9/16"
Reference dim. for
MAX. support height
with typical 36" countertop
height
Add suitable filler
to match adjacent
cabinets when needed
to maintain toe kick
alignment
This installation is to achieve minimum gap between bottom of countertop and control panel.
Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec
of at least 194°
For answers to your Monogram,
®
GE Profile Performance Series,
GE Profile
or GE appliance questions, call
GE Answer Center
®
service, 800.626.2000.
Listed by
Underwriters
Laboratories
R
Power cord
Junction box(s) for
oven & radiant
cooktop 22" from
floor
36" Typical
Countertop height
22
Reference
5-9/16
Side View

Advertisement

loading

Summary of Contents for GE GE Profile JTP17SCSS

  • Page 1 Note: Oven is rated for use only under the following cooktops: • GE 30" and 36" electric coil and CleanDesign cooktops (Excluding Induction) • GE 30" and 36" gas standard and sealed burner cooktops Note: Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size.
  • Page 2 27-1/4'' MIN. 27-5/16'' MAX. Note: Oven is rated for use only under the Cutout height following cooktops: • GE 30" and 36" electric coil and CleanDesign cooktops (Excluding Induction) Recommended cutout location • GE 30" and 36" gas standard and sealed 32-1/2"...
  • Page 3 ™ 30" Single Wall Oven Features and Benefits • TrueTemp™ System • Extra Large Capacity Self-Clean Oven with Delay Clean Option • SmartSet Electronic Oven Controls • Electronic Clock and Kitchen Timer • Variable Broil / Six-Pass Broil Element • Extra-Large Broiler Pan with Grid •...