Kyocera Fax System (U) Service Manual page 41

Item No.
U640 Setting communication time 1
Description
Sets the detection time when one-shot detection is selected for remote switching. (This setting
item will be displayed, but the setting made is ineffective.)
Sets the detection time when continuous detection is selected for remote switching. (This setting
item will be displayed, but the setting made is ineffective.)
Method
1. Press the start key.
2. Select the item to be set.
Time (One)
Time (Cont)
Setting the one-shot detection time for remote switching
1. Change the setting using the cursor left/right keys.
One-shot detection time for remote switching
2. Press the start key. The value is set.
Setting the continuous detection time for remote switching
1. Change the setting using the cursor left/right keys.
Continuous detection time for remote switching
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Sets the one-shot detection time for remote switching.
Sets the continuous detection time for remote switching.
Description
Description
Description
Description
Setting range
0 to 255
Setting range
0 to 255
1-3-19
5JR
Initial setting
7
Initial setting
80