Installing The Display Assembly; Display Bezel; Removing The Display Bezel - Dell Precision 3520 Owner's Manual

Installing the display assembly

1 Place the display assembly to align with the screw holders on the computer.
2 Tighten the M2.0x5.0 screws to secure the display assembly to the computer.
3 Turn over the computer.
4 Route the display cable through the routing channel and route the antenna cables by pushing it through the hole.
5 Connect the antenna cables and display cable to the connectors.
6 Place the display cable bracket over the connector and tighten the M2.0x5.0 screws to secure the display cable to the computer.
7 Install the:
a hinge cap
b WWAN card
c WLAN card
d battery
e base cover
8 Follow the procedure in

Display bezel

Removing the display bezel

1 Follow the procedure in
2 Remove the:
a base cover
b battery
c WWAN card
d WLAN card
e hinge cap
f display assembly
3 Pry the edges [1,2,3,4] to release the display bezel from the display assembly.
40 Removing and installing components
After working inside your computer.
Before working inside your computer.