Installing The Hinge Cap; Display Assembly; Removing The Display Assembly - Dell Precision 3520 Owner's Manual

Installing the hinge cap

1 Place the hinge bracket to align with the screw holders on the computer.
2 Tighten the M2x3.0 (OD4.5) screws to secure the display assembly to the computer.
3 Install the:
a battery
b base cover
4 Follow the procedure in

Display assembly

Removing the display assembly

1 Follow the procedure in
2 Remove the:
a base cover
b battery
c WWAN card
d WLAN card
e hinge cap
3 To disconnect the display cable:
a Release the WLAN cable from the routing channels [1].
36 Removing and installing components
After working inside your computer.
Before working inside your computer.