g
base cover
5
Follow the procedure in
Display panel
Removing the display panel
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
c
WWAN card
d
WLAN card
e
hinge cap
f
display assembly
g
display bezel
3
Remove the M2.0x3.0 screws that secure the display panel to the display assembly [1] and lift to turn over the display panel to access
the eDP cable [2].
4
To remove the display panel:
a
Peel off the adhesive tape [1].
b Lift the blue tape that secures the display cable [2].
c
Lift the latch and disconnect the display cable from the connector on the display panel [3] [4].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
43